Aluminum Chips Briquetting Press Machine for Recycling Business

No matter how you slice it, manufacturing aluminum products leads to aluminum

and fluid waste.

Aluminum scrap metal, in the form of turnings, filings, chips and shavings, is

produced every day of production, piling up on the equipment and floor. Swept up

and stored in bins, the scrap metal pieces then take up valuable floor space.

In addition to scrap, the metalworking process also produces sludge, a

combination of small aluminum pieces and fluids used during the process. Like

scrap, sludge is difficult to store and manage in a manufacturing facility,

requiring a multistep process that can take more time, effort and resources than

most manufacturers have to invest.

While aluminum and fluid waste can be costly to dispose of and difficult to

reuse without processing, there is an often overlooked solution in briquetting.

Aluminum briquetting allows manufacturers to both eliminate costs related to

waste disposal and create a new source of revenue.

Aluminum briquette machines from ENERPAT transform scrap metal into small

briquettes that can be easily stored, removed and even sold. This helps

manufacturers reclaim value from once costly aluminum waste products. Each

ENERPAT briquetting system uses hydraulics to compress aluminum scrap into dense

briquettes and separate any fluids used in the metalworking process from the

scrap metal. Briquettes created by ENERPAT briquetting systems are easy to

transport or store and are less likely to experience corrosion, increasing their

resale value. The expensive processing fluids squeezed out during the process

allows manufacturers to reuse or recycle the fluids as they see fit.

The benefits of implementing an aluminum briquetting system for scrap are

numerous. With many manufacturers looking to improve their bottom line, ENERPAT

briquetters offer companies a way to:

  Squeeze value from aluminum waste;

  Reclaim valuable floor space;

  Keep the workplace clean and safe;

  Eliminate costly disposal fees; and,

  Generate a new revenue stream from aluminum scrap briquettes and reclaimed

  fluids.

Official Photo:

Horizontal Type

Vertical Type

If you have any interested,  Welcome contact me (Lucy)  freely !

Will send you Machine Details Immediately !

Whatsaap/Viber: +86 1348 513 6716

Email: lucy@enerpat.com Skype: lucy.shaoo

TEL:0086-0513-55087511  FAX: 0086-0513-87782755

ENERPAT FACTORY:

Does Your Business Need A Metal Baler

What Are The Benefits Of Metal Baler?

• Baler can increases the value of your scrap metal and turns your scrap into an ongoing income stream.
• Costly cutting fluids previously lost due to seepage in transport and storage can be reclaimed and re-used.
• Baler material helps alleviate any potential cross contamination with other materials.
• Baler are almost free of coolant compared with loose chips and don’t leak coolant during transportation around the factory or en route to the re-cycler.
• Baler eliminate the need for drying racks or centrifugal driers, removing a costly handling process.
• Transportation, handling and storage costs are lowered as a result of the volume reduction achieved through Baling.
• Machine briquette counters allow you to accurately monitor the amount of scrap being produced.
• Baler your swarf allows a substantially more localized and tidy storage of your scrap, thus reducing your occupational health and safety risks
• Balerare mostly free of coolant, reducing your potential EPA liability.

What types of metals can disposed ?

• Aluminium Chips and Turnings
• Aluminium Cans
• Steel Chips and Turnings
• Steel Cans
• Stainless Steel
• Brass
• Titanium
• Cast Iron
• Copper
• Nickel
• Oil Filters

Why do recyclers pay more for metal bales compared with loose chips?

Bales are drier and “purer” than loose chips. As a result the need for the recycler to dispose of waste coolants is reduced, because loose swarf burns the material yield in the melting process is increased and the amount of material processed per melting cycle is also increased.

How much more can I expect to earn for a bale compared to loose chips?

Briquette prices vary depending on the briquette quality, material type, company location, market conditions and recycler volumes. Companies have achieved as much as 3 times the value for bales compared to loose chips, start by speaking to your recycler about the increased value achievable for quality bale.

How much moisture will be removed from my scrap chips

Command series bales typically expel up to 99% of moisture contained in loose chips. As coolant can comprise as much as 30% of total loose chip weight, reclaiming lost coolant is worthwhile financially.

What is the typical volume reduction of material?

Volume reduction is based on chip structure and grade of the material being processed. Our lab testing has yielded reduction ratios ranging from 3:1 to as much as 20:1. Eg; reducing 20 barrels of chips into 1 barrel of briquettes increases the material that is transported per load to the recycler and reduces valuable factory storage space requirements.

What advantages do briquettes offer foundries?

• Balers achieve higher yields in the remelt process. Due to the density of briquettes, less oxidation of the material takes place due to decreased surface area of the material as compared to loose chips. This increases the volume of pure material recovered during the remelt making bales more valuable to the re-melter.
• Reduced moisture in briquettes means it is safer and easier to handle.
• Once a material is baled, due to its near solid state it cannot be mixed with other materials ensuring a high quality product for remelting.

Machine Video:

If you have any interested,  Welcome contact me (Lucy)  freely !

Will send you Machine Details Immediately !

Whatsaap/Viber: +86 1348 513 6716

Email: lucy@enerpat.com Skype: lucy.shaoo

TEL:0086-0513-55087511  FAX: 0086-0513-87782755

ENERPAT FACTORY:

Automatic Scrap Metal Baler Machine/Aluminum Tin Can Baler/ Pop Can Baling press/UBC compactor

OFFICIAL PHOTO:

Lid Type:

Hopper Type: ---(New Design ,best popular for Aluminum Cans)

Machine Detail Photo:

RAW MATERIAL:

END PRODUCT:

MACHINE Video:

If any interested, welcome contact me ( Lucy ) freely as below:

Whatsaap/Mobile: +86 1348 513 6716

Email: lucy@enerpat.com   Skype: lucy.shaoo

TEL: 0086-0513-55087511    FAX: 0086-0513-87782755

(Automatic Scrap Metal Baler Machine/Aluminum Tin Can Baler/ Pop Can Baling press/UBC compactor For Hot Sales)

ASIAN PRODUCTION BASE OF ENERPAT:

Hydraulic Alligator Shear for scrap ferrous and Non ferrous metal

The hydralic alligator shear is a generally popular by scrapyard ,be able to handle all grades of ferrous and non ferrous scrap and automotive scrap .

Alligator shear is very popular used for cutting long size metal scrap, generally where accuracy is not an important consideration, and the size or shape of the material makes other cutting or shearing options impractical- often the only other cutting option is cutting with a torch. Alligator shears are often used in conjunction with large metal shredders in the metal recycling industry, to 'clean' or prepare scrap for shredding by removing unwanted fittings or other parts the shredder will not accept.

OFFICIAL PHOTO:

Alligator shears cut scrap metal into smaller pieces and help to separate different material types, earning you more money from your scrap metals. Alligator shears are ideal for recycling scrap bar, tube, extrusions, car radiators, gear boxes ,Scrap catalytic converter and gate valves as well as for weapons destruction and for cutting cable prior to stripping or granulation. We have alligator shear models available for all sizes of material and throughput and for different types of working conditions, powered by both single and 3 phase power supplies as well as diesel options for larger shears. All shears have been built to last using quality heavy duty components and, with operator safety upper-most in mind, our range of shears are equipped with blade guards and foot-operated switches.

Features:

● Siemens motor for option

● Schineider electrical system

● Germany cutting blades
● Automatic button control
● Safety Protection device
● Robust casting structure

 ● Equiped with foot control switch

● UK quality control management

● CE approved

Machine Video:

If any interested, welcome contact me ( Lucy ) freely as below:

Email: lucy@enerpat.com
Mobile: +86 1348 513 6716(Whatsapp/Viber)
Skype:  lucy.shaoo
TEL:   0086-0513-55087511 
FAX:   0086-0513-87782755

Our Customer:

ASIAN PRODUCTION BASE OF ENERPAT:

Hydraulic Metal Chips Baler/Baling Press Machine/Compactor -Collecting Scrap swarf for more profit !

Metals such as Fe, Al, etc. are widely used in manufacturing to produce almost all kinds of industrial and consumer products. Each year, a huge amount of metal chip solid waste is generated from the manufacturing industry. These manufacturing chips, mixed with cutting fluid, are difficult to recycle. Current manufacturing companies either landfill these wastes or pay a third party to haul them away, causing both environmental and economic issues. As widely recognized, recycling these metal chip wastes could enhance the economic profit and reduce the environmental impact of manufacturing.

We are a professional manufacture for all kinds of metal baler.,under UK strict quality control management,We take care of the professional processing of your chips, punchings and sprue.

OFFICIAL PHOTO:

LID TYPE:

HOPER TYPE:

FEATURES:

● Siemens motor for option

● Schineider electrical system

● German wearable plate for pressing chamber

● Automatic PLC control/Manual control for option

● Equiped with blades for cutting off oversized scrap

● Robust casting structure

● Large box with or without front loader

● UK quality control management

● CE approved

Machine Video:

If any interested, welcome contact me ( Lucy ) freely as below:

Email: lucy@enerpat.com
Mobile: +86 1348 513 6716(Whatsapp/Viber)
Skype:  lucy.shaoo
TEL:   0086-0513-55087511 
FAX:   0086-0513-87782755

Our Customer:

ASIAN PRODUCTION BASE OF ENERPAT: